file Blu tack with BRX

  • Ghost223's Avatar Offline school
  • New Member
  • New Member
    • Posts: 2
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
Ghost223 Posted 3 weeks 4 days ago
#30213
Have 3 BRX that will be sitting on vti rf stands but unsure how to use the blu tack. Do I remove the rubber feet from the bottom of the BRX?

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3130
    • Thank you received: 3381
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 2 weeks 5 days ago
#30215
Hi Ghost223, First, I would recommend leaving the rubber feet on the bottom of your BRXs. Next, Blu Tack is really non-hardening adhesive putty - that doesn't damage the cabinet finish of your speakers. I'd suggest using 4 x "globs" of Blu Tack that are reasonably thick - so the Blu Tack is thicker (or taller) than the small feet that are attached to the bottom of the speaker. This should work quite well. Happy Listening!

Please Log in or Create an account to join the conversation.

  • Ghost223's Avatar Offline school
  • New Member
  • New Member
    • Posts: 2
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
Ghost223 Posted 2 weeks 5 days ago
#30220
Great thanks

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Aon Series Blu tack with BRX