file AVR Upgrade !

  • Antman27's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 10
    • Thank you received: 4
  • arrow_drop_downMore arrow_drop_upLess
Antman27 Posted 3 weeks 3 days ago
#28989
hello all so I have been using an older (pre HDMI) Denon 3805 and Just upgraded to a Anthem MRX1120.

Using Triton 3+ and XL center . Running a 5.1 livingroom .

I ran ARC and it set my 3+ at 250 HZ crossover ( so changed that to None)

I still have to tweak and learn the AVR but I am Not blown away by the upgrade as i hoped to be .

Any suggestions with Tritons and Anthem ?

Please Log in or Create an account to join the conversation.

  • twotooneadam12's Avatar Offline
  • Senior Boarder
  • Senior Boarder
    • Posts: 44
    • Thank you received: 59
  • arrow_drop_downMore arrow_drop_upLess
twotooneadam12 Posted 3 weeks 3 days ago
#28992

Antman27 wrote: hello all so I have been using an older (pre HDMI) Denon 3805 and Just upgraded to a Anthem MRX1120.

Using Triton 3+ and XL center . Running a 5.1 livingroom .

I ran ARC and it set my 3+ at 250 HZ crossover ( so changed that to None)

I still have to tweak and learn the AVR but I am Not blown away by the upgrade as i hoped to be .

Any suggestions with Tritons and Anthem ?


I found the room to have a lot of interaction with arc. MRX 720
I get outstanding results, with arc run at 500hz. No x over for triton 2’s. It took me several months to learn arc.
I started out with 2 channel, ran quick curve, then used mic to experiment.
Created 4 curves. 2 channel, movie, music, arc off.

Ran all positions eventually, then used an analog spl meter to tweak to my liking.

Hope that helps.

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Triton Series AVR Upgrade !