SuperSat Series (104 topics)

arrow_downward
Moderator's Avatar
Hello everyone. I am the happy owner of a pair SuperSat 3 speakers. They are driven by a Marantz SR1100. This receiver is on the low end of driver...
Moderator's Avatar
I am considering some changes in my system setup. Part of that would entail moving my SuperSat 60c from it’s current shelf-mounted position and...
Moderator's Avatar
The SuperSat 3 are understandably thin on the bass end. What do you guys recommend for a crossover setting for the SuperSat 3s in a 7.2.4 setup? I'm...
Moderator's Avatar
I currently have an all SuperSat3 5.1 speaker setup in my basement and will be adding 2 more SuperSat3 speakers on the side walls for Dolby Atmos....
Moderator's Avatar
Greetings, Planned setup in Media room is 5.1.2 with Triton Supercenter XXL, Triton 2+ Fronts (Planned), Triton 3 Rears, Supersat 60c's for Atmos,...
Moderator's Avatar
Can someone tell me the measurement from the end of the Supersat60 speaker to the middle of the speaker wire binding posts? Thanks in advance.
Moderator's Avatar
I have an all SuperSat 3 speaker set-up with L/C/R and surrounds with a FF 4 sub. I have a new Anthem MRX-720. I am trying to get my speakers set-up...
rjohn79395's Avatar
Looking for some advice. My system is as follows 5.1.2 Supersat 60c center @200 watts Supersat 60 front R/L @200 watts Supersat 50 rear R/L @200...
Moderator's Avatar
file ARC Cutoff frequency
attach_file
I have thee Anthen 710 with Superstat 50/50c. When I run the Anthem Room Correction it si giving 110hz as the cut off for LCR channels. Is rhat ok?...
Roman Johnston's Avatar
Hi :-) I'm creating a new system comprising of the SuperSat 50 L/R/C for the front and two SuperSat3 for the rear L/R. I would like to know if...
Moderator's Avatar
Hello friends, I'm considering either the SuperSat 50/60 as my surrounds (joining Ones and SuperCenterXXL). Problem is that my speaker wires on the...
Moderator's Avatar
Just curious how it would work out? I cant see spending $250.00 for each of my speakers in my system and having to spend $1000.00 for invisa HTR's....
New Golden's Avatar
Hi All. New and proud owner of Aon3 as front mains in a 5.1 set up. I am using my old Canton AV 500 for my center. It sounds good to me with the Aon3....
Dwight's Avatar
I have a room with built in bookshelves in the rear of the room. I'm contemplation using supersat 50c's for the rear channels and placing them on top...
dgetz's Avatar
I have upgraded my front left/right speakers from SuperSat 50's to Triton 3's. In the process I am migrating from 5.1 to 7.1 where my two back...
Moderator's Avatar
I recently replaced my Cambridge Soundworks Biopole/Diopole surrounds with Super Sat 3. They do not fill the room with sound as well at least when...
bak464s's Avatar
I'm pretty new to this, so please excuse me, this may be a dumb question. I'm starting to build a home theater set up and am going to start out small...
T Cobe's Avatar
Hi. Can I mount the supersat 50 horizontally for surrounds? Thanks
WayneWilmeth's Avatar
I have the goldenear supersat 50 http://www.goldenear.com/products/supersat-series and would love to have a stand. Only issue is that the speaker is...
bradorner's Avatar
Is it possible to rotate the SS50C's tweeter to use it as a vertical SS50? I'm considering upgrading to a SS60C and wondering about also getting...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support SuperSat Series