file 4 x HTR7ks and 2 x Invista 650

  • dastrix's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 12
    • Thank you received: 6
  • arrow_drop_downMore arrow_drop_upLess
dastrix Posted 2 years 5 months ago
#23772
In a 5.2.4 system, which would be the best use for the Invista 650?

My ceiling is sloped/vaulted (2.5 to 2.6m) where the speakers will be installed for the Height setup. The Rear surround location is in a bulkhead which is flat - non vaulted section but is still in the ceiling.

Should I use the 650s as rear height in Atmos (vaulted) or as rear surrounds (non vaulted)?

I figured perhaps the best setup was:

Front Two Height speakers - HTR7000 pointed towards the MLP
Rear Two Height speakers - Invista 650
Rear Two Surround speakers - HTR7000 pointed towards the MLP

Thoughts?
The following user(s) said Thank You: HTSME

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3020
    • Thank you received: 3337
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 2 years 5 months ago
Last edit: 2 years 5 months ago by Moderator. info_outline
#23786
Sounds like the right mix. You don't want to use ceiling speakers for non-height channels unless they are HTR 7000s positioned adequately far from the MLP.
The following user(s) said Thank You: HTSME

Please Log in or Create an account to join the conversation.

  • dastrix's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 12
    • Thank you received: 6
  • arrow_drop_downMore arrow_drop_upLess
dastrix Posted 2 years 5 months ago
#23791
Thanks, then ill buy an additional 2 x HTR7000s as my rear surround and use the Invista 650 as ATMOS rear height
The following user(s) said Thank You: HTSME

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Invisa Series 4 x HTR7ks and 2 x Invista 650