Invisa Series (131 topics)

arrow_downward
Moderator's Avatar
I just finished cutting the holes in my ceiling and popped a speaker in to verify they fit. so far so good. While I was looking at them i tried aiming...
GoldenKnight007's Avatar
Ok so I'm looking to place 4 in ceiling 650 I bought but due to no attic space and my indented roof being concrete I can only put them 2 feet from...
rjohn79395's Avatar
Hi,so I will be running 4- 650 Atmos height speakers and 2 mpx for surrounds ..what should I set there crossover at .. for 650 and mpx..now the Triton...
Moderator's Avatar
I'm building a new wall to install three Invisa SPS speakers (L/R vertical, C horizontal). I have a lot of flexibility and was wondering if there was...
Moderator's Avatar
Using a Ceiling thats between 7.8 & 9.8 foot in height? Would 2.7 to 3 meters be OK from the MLP when used as Rear or Surrounds in ceiling?
Moderator's Avatar
Htr7000 or 650 for atmos for 10 foot ceilings let me know . thanks
Supered17's Avatar
Hi, My current room layout is 15x15 with 10-8 inch foot vaulted ceilings now the living room is open to the kitchen and I do have a back rear wall...
rjohn79395's Avatar
Hi Guys, I'm designing a 27ft Long by 18ft wide room with a 10ft high ceiling. What kind of SPL levels or throw can i achieve from the invisa series...
Moderator's Avatar
HI, I need some help from anyone w experience w atmos and invisa speakers. I am trying to plan setting up a room for possible 5.2.4 atmos using all...
Moderator's Avatar
file HTR7000 placement
attach_file
I am putting together a 7.1.4 Atmos set up and have read through the Dolby Atmos HT install guideline. Up front, I have the TRs and XXL center with...
WayneWilmeth's Avatar
So looks like a new Invisa in-wall is coming and be shown at CEDIA 2017. Looks like exactly what I would want behind my upcoming theater with...
dastrix's Avatar
In a 5.2.4 system, which would be the best use for the Invista 650? My ceiling is sloped/vaulted (2.5 to 2.6m) where the speakers will be installed...
Moderator's Avatar
Hi, I've been demoing GoldenEar speakers for a new 7.x.4 ATMOS home theater. I've come to a preliminary speaker package with the dealer of a pair of...
Moderator's Avatar
Loyal Goldenear owner here looking to bring music outside to a covered patio that will be built soon. I’ve seen some in ceiling speakers that are...
CRRobert's Avatar
Anyone know if we can get the rough-in brackets yet? How much will the brackets cost? I am in the process of building a house and plan on ordering...
Moderator's Avatar
GE friends... I was wondering IF using Invisia 7000's only in a 7,2,4 setup would work.. A dealer told me it works amazingly well... My only concern...
rjohn79395's Avatar
Hello, I currently have an Atlantic Technology 5.1 system in my big, open living room consisting of a passive LCR soundbar (FS-5000) and in-ceiling...
Moderator's Avatar
Hey folks, hoping to pick your brains. I just moved into a new house and want to fulfill a dream of creating a home theater. The den is about 22 x...
CRRobert's Avatar
I have searched the forums for an answer for back boxes for the HTR7000. It looks like 1.6 or 1.7 cu ft is the general consensus. For the life of me I...
Moderator's Avatar
Greetings. I am looking to purchase the HTR 7000 to sit as the 6th and 7th channel in my home theater. I can't seem to find any information on the...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support Invisa Series