file Center Channel interference?

  • wespurch's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 2
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
wespurch Posted 7 years 9 months ago
#1384
MTM designed center channels have proven problematic with considerable interference between drivers and often poor and irregular dispersion from the high frequency unit. Has Golden Ear taken special steps to correct these problems in the center channel section of the SC3D? I understand that the outer drivers in the L/R channels have been placed in a way to eliminate or reduce interference between the left and right channels. Have similar steps been taken to address similar center channel problems designed in the MTM configuration?

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3020
    • Thank you received: 3337
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 7 years 9 months ago
#1385
Yikes... not well designed ones. With appropriate selection of crossover point, driver distances relating to the particular drivers dispersion patterns and frequency response, the combing and interference effects of the side by side drivers can be properly controlled. Just for fun I will pass this on to our engineering team to see if they'd like to make our heads spin with a technical response.

By the way, after all the technical stuff is discussed to death, hearing is believing... have you read the reviews? :-)
The following user(s) said Thank You: wespurch

Please Log in or Create an account to join the conversation.

  • wespurch's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 2
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
wespurch Posted 7 years 9 months ago
Last edit: 7 years 8 months ago by Moderator. info_outline
#1386
The technical stuff would be very interesting to me, as I'm inclined that way (I was an EE a lifetime ago.) I understand that Performance Audio in San Francisco is one of your dealers, and will go there to hear this unit if they have it in stock.

Thanks,

Wes

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3020
    • Thank you received: 3337
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 7 years 8 months ago
#1391
Please do, they should have one setup for you to listen to in stereo and surround. I'll post to this thread if the engineering team graces us with a reply :-).

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support SuperCinema 3D Array Center Channel interference?