file TritonCinema Two with Onkyo Question

  • Ted Macias's Avatar Offline school
  • New Member
  • New Member
    • Posts: 3
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
Ted Macias Posted 7 years 2 months ago
Last edit: 7 years 2 months ago by Moderator. info_outline
#3286
I have recently purchased the Triton Two's, Supersat 3 (4 of them), and your SuperCenter XL to replace my old system. I have a Onkyo txnr 1007 AV Receiver and am trying to set the speaker size correctly for all. This receiver does not indicate large or small for speaker size. It does however, allow me to enter crossover frequencies for all. I have the lfe signals going into the towers but would like help in selecting the recommended frequencies for the towers, center, and surrounds. Can you Help?

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3063
    • Thank you received: 3352
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 7 years 2 months ago
Last edit: 7 years 2 months ago by Moderator. info_outline
#3288
Hi Ted, thanks for the purchase! I am not 100% familiar with the Onkyo menus so maybe somebody else will chime in, but I believe you want to do the following for your bass management settings (make sure Audyssey has been defeated if you used that on your old speaker system, run a factory reset if necessary to clear all old settings first):

1) Set Subwoofer to NO, or NONE
2) Set Triton Two to FULL BAND (No Crossover)
3) Set SuperCenter XL to 80 HZ Crossover
4) Set Surrounds and Rears (SuperSat 3's) to 120 Hz Crossover
(If your Onkyo only allows for a single crossover setting for all non-full band channels, set it at 100 Hz.)

Hope this helps. Have fun!

Please Log in or Create an account to join the conversation.

  • Ted Macias's Avatar Offline school
  • New Member
  • New Member
    • Posts: 3
    • Thank you received: 0
  • arrow_drop_downMore arrow_drop_upLess
Ted Macias Posted 7 years 2 months ago
#3289
Thank you for the quick response. I also have a jL audio fathom sub that needs to be connected. The receiver has 2 sub ins so I assume I need to split one and have both tritons on it? Also you mentioned to say no to subwoofer? Thanks for your help.

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 3063
    • Thank you received: 3352
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 7 years 2 months ago
#3290
You did not mention that in your post.

1) No, do not hook up the Tritons to the sub out of your receiver;
2) Set sub to Yes, no other changes;

This will send LFE only to the sub and not to the Tritons. There are other hookup options and considerations, to involved to discuss in a forum post, but this would be the recommended setup.

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Basic Hookup and Wiring Questions TritonCinema Two with Onkyo Question