arrow_downward
Moderator's Avatar
Hi Moderator, I wanted to post a jpg and was refused based on size. What is the maximum file size we are allowed to post? Thanks, DT
rjohn79395's Avatar
Here I go again - playing with my AV technology. Today I decided to investigate how the "Double Bass" feature in my Onkyo 3009 9.2 channel AV...
T Cobe's Avatar
The power cables provided with the Triton2s are a lot longer than I need them to be. My power source comes through the floor right by the speaker, so...
WayneWilmeth's Avatar
Thinking about upgrading the power cords and speaker cables on my year old Triton threes. Like the Groneberg cables from Odyssey Audio and was...
T Cobe's Avatar
I have just ordered a 3D Array soundbar and Forcefield 4 sub and wanted to get some recommendations on speaker wire and connection wires for both of...
ArthurDaniels's Avatar
My Triton Ones with new XXL Super Center arriving Monday. The school of thought appears to be shifting toward utilizing the LFE input on the Ones in...
Spencer's Avatar
Hi guys, I have been looking all over the place to try and find an answer and would really appreciate any help. I have a Marantz SR5008, triton 7's...
ArthurDaniels's Avatar
Hi, everyone I have for some time been fascinated by the interactions I have observed between Triton powered towers and the the amps that feed them....
fopmc's Avatar
Hello All, I have heard a lot of speakers over the years and I know I must have something wrong with my setup. I am coming off a bose system (wife...
fopmc's Avatar
I recently took delivery of a used Sherbourn 200x5 power amplifier. I have to use RCA cables today because my HK AVR 630 only has RCA pre-outs. I...
murphyslaw1978's Avatar
Hi Folks, I recently went from 5.1 to 7.1 by adding a nice pair of SuperSat 50s on the back wall. These match my 50s on the sides now and sound...
Moderator's Avatar
So I have been experimenting with the Onkyo 838 with Triton 2s and very carefully comparing the using the LFE cables vrs not. Here's what I have...
Moderator's Avatar
I am about 3.5 - 4 feet from the wall (desk between) and SSat3's are mounted on the wall with tweet just above ear level and pointed slightly in and...
mleuba's Avatar
Hello All, I am an owner of B&W CM 7's. I am planning to upgrade to the Triton Ones soon. But I first have to resolve an issue, size and placement....
anthem's Avatar
Hey guys, So I had a quick question regarding setting for stereo and surround sound. I've heard that some speakers prefer a 4 Ohm setup, but that if...
WayneWilmeth's Avatar
Hello GoldenEar Team, Can you please share the music or content test tracks or CDs you use for tuning or testing Triton Three and SuperSat 50...
georgemrvossr's Avatar
Are there any precautions that have to be taken when connecting the Triton 2's to a Pass Labs amp? In the owners manual of the Pass Labs amp it...
rgallos's Avatar
Question regarding impedance settings. Assuming the nominal impedance of the Triton ones is 8 ohms(but can drop down to 4 ohms), I'm wondering what...
Moderator's Avatar
In the LA area we have had our share of power outages. I heard when the electric power comes back up there is a huge power spike/surge which could...
anthem's Avatar
I was going to go with the 12 gauge (unless that overkill) as I have to wire a 7.1 system and have two external house speakers. Any thoughts as their...
arrow_upward
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Getting Started Basic Hookup and Wiring Questions