file Newb Assistance Needed

  • ArthurDaniels's Avatar Offline
  • Platinum Boarder
  • Platinum Boarder
    • Posts: 881
    • Thank you received: 1781
    • Karma: 1
  • arrow_drop_downMore arrow_drop_upLess
ArthurDaniels Posted 6 months 2 weeks ago
#27742
Run a cable from the Amp LFE to a Y Splitter. Run a cable from each leg of the Y Splitter to another Y Splitter. A total of 3 splitters now connected. The two open splitters provide 4 outputs. Run cables from each splitter output to a Triton LFE input.

Now, before you implement this setup, I recommend the following test:

Run a single cable from the amp LFE output to one of the Triton LFE speakers. Find some recordings of test signals so that you can listen to various bass frequencies with this setup. Make mental audible note of the loudness as you listen.

Then, implement the entire setup with splitters, except connect only one of the 4 splitter outputs to a Triton LFE input. Listen to the test tones again and note any audible differences (possibly level differences or whatever you hear).

If you are happy with what you hear, connect the remaining three Triton LFE inputs, one at a time so that you have two, then three, then finally four connected. At each connection listen again and note differences.

The purpose of this test is to determine whether or not loading these connections to the original amp LFE output via the splitters is causing any sound issues because of impedance changes, etc.

If you find objectionable issues, you will need to either not connect cables to all Tritons via splitters, or do research to find an electronic device which will split the signal while maintaining proper impedance loading.

Happy listening,

Art

Please Log in or Create an account to join the conversation.

  • GDHAL's Avatar Offline
  • Platinum Boarder
  • Platinum Boarder
    • Posts: 500
    • Thank you received: 797
    • Karma: 1
  • arrow_drop_downMore arrow_drop_upLess
GDHAL Posted 6 months 2 weeks ago
#27743

mbsales11701 wrote: Thank you for the responses!

I now in my possession the T1's, T2's, SCXXL, the Denon X8500h and the OLED C9.

I am reluctant to spend another 1200 on the 4 Atmos speakers, Monoprice has the Amber series 8" ceiling speakers with a ribbon tweeter for 125 bucks a pair, I am thinking of purchasing those instead as Atmos speakers are just for filler.

I was reviewing Sandy's set up tips, and theres one part I cannot visualize. How do I connect the 4 LFE plugs to take advantage of the T1's and T2's for home theater use?

Single RCA from X8500 LFE out to a Y Splitter, and then single cables from the splitter to the individual speakers?


I'm no expert on the LFE connectivity as I don't use it. I took a quick peek at the back of your Denon X8500h. Seems to me you would NOT need a splitter of any kind. I'd have to think the user manual of the X8500h could be of assistance.

Side note, isn't the C9 simply spectacular! B)
Golden Ear Triton Reference (pair), Musical Fidelity M6si, Schiit Yggdrasil-B, Oppo UDP-205, Emotiva ERC-3, LG OLED65C9PUA, Salamander Synergy Triple Unit SL20, Audeze LCD-X
halr.x10.mx/TritonReference.htm ; halr.x10.mx/other.html ; halr.x10.mx/AV.jpg

Please Log in or Create an account to join the conversation.

  • rjohn79395's Avatar Offline
  • Platinum Boarder
  • Platinum Boarder
    • Posts: 2141
    • Thank you received: 4128
    • Karma: 2
  • arrow_drop_downMore arrow_drop_upLess
rjohn79395 Posted 6 months 2 weeks ago
#27745

mbsales11701 wrote:
I now in my possession the T1's, T2's, SCXXL, the Denon X8500h and the OLED C9.

I was reviewing Sandy's set up tips, and theres one part I cannot visualize. How do I connect the 4 LFE plugs to take advantage of the T1's and T2's for home theater use?

Single RCA from X8500 LFE out to a Y Splitter, and then single cables from the splitter to the individual speakers?


Hi, Alex

Yes you can use splitters for the LFE leads, and can use both LFE sub pre outs. I use one pre out to feed the front Tritons and the second to feed the surround Tritons. You can then separately adjust reciver sub gain to better balance front/rear bass levels.

Anyway, that's how I did it.

Enjoy!

Rick
5.4.4 HT speakers: T Ref fronts/LFE 1, SuperCenter Ref, T1 surrounds/LFE 2, HTR 7000 top fronts, Invisa 525 top rears
Zone 2 speakers; 2 Invisa 525's
AVR: Marantz SR 7010
Amps: AT525NC 5 channel, Parasound 275 v.2 stereo
Cable/TiVo, OPPO BDP 105D, Bluesound Node 2i
47" Panasonic 3D smart tv

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Clubhouse Show Off Your GoldenEar System Newb Assistance Needed