file Installing Threaded Brass Inserts for Rubber Feet

  • eXcalibur's Avatar Offline school
  • Fresh Boarder
  • Fresh Boarder
    • Posts: 18
    • Thank you received: 17
  • arrow_drop_downMore arrow_drop_upLess
eXcalibur Posted 5 years 10 months ago
#4299
The manual says to gently hammer the three threaded brass inserts through the sock fabric where the pre-drilled holes are, but they don't seem to want to budge in. I feel like if I hammer them any harder, they may damage the speaker. Before hammering the inserts in, I made sure they aligned properly with the pre-drilled holes with the narrow part going in first.

Does anyone have any advice how to properly install these? And by 'gentle' hammering, how much force should I really be using? I mainly want to install this to give the center speaker a slight pitch up in angle to aim it directly at ear level.

Thanks,

Please Log in or Create an account to join the conversation.

  • Moderator's Avatar Offline
  • Moderator
  • Moderator
    • Posts: 2929
    • Thank you received: 3283
    • Karma: 19
  • arrow_drop_downMore arrow_drop_upLess
Moderator Posted 5 years 10 months ago
#4300
Sorry, "gently" was the wrong word. You need to smack them pretty hard to get them started. Put the speaker on a solid surface with a towel under it and give 'em a whack. I was surprised the first time too - probably should get someone to re-do that manual. :)

Please Log in or Create an account to join the conversation.

Moderators: Moderator
menu
close
Menu
person_outline
arrow_back
You are here: Home Forum Support SuperCenter Series Installing Threaded Brass Inserts for Rubber Feet